Molded Trailer End Connector & Cable
Plastic RV trailer connector molded to heavy duty trailer cable. Made with self-clearing contacts and molded to encapsulate terminals
and wires to form one weather-tight assembly. Each cable is 6 foot long.
7-Way Molded Trailer End Connector & Cable
10 Gauge (Black & White) 12 Gauge (Blue) 14 Gauge (Brown, Red, Green, & Yellow)
BA-5067001 $28.00 each
6-Way Molded Trailer End Connector & Cable
14 Gauge (White, Blue, Brown, Red, Green, & Yellow)
BA-5061106 $19.00 each
Plastic RV trailer connector molded to heavy duty trailer cable. Made with self-clearing contacts and molded to encapsulate terminals
and wires to form one weather-tight assembly. Each cable is 6 foot long.
7-Way Molded Trailer End Connector & Cable
10 Gauge (Black & White) 12 Gauge (Blue) 14 Gauge (Brown, Red, Green, & Yellow)
BA-5067001 $28.00 each
6-Way Molded Trailer End Connector & Cable
14 Gauge (White, Blue, Brown, Red, Green, & Yellow)
BA-5061106 $19.00 each
Primus Brake Control (For 1, 2, & 3 Axle Trailers)
BA-90160
Key Features:
$97.15 each
BA-90160
Key Features:
- Utilizes the primary motion sensor of Prodigy and has a one step "Point and Go" set-up.
- Digital display depicts voltage delivery to trailer during braking.
- Snap-in-dash mounting clip & removable electrical connector allows unit to be quickly stored when not in use.
- Made for up to three-axle braking systems.
- Pre-assembled wire harness for simple hookup.
$97.15 each
| ||||||||||
Shur-Set III Breakaway Systems
For use on single, tandem, tri- and/or four axle trailers equipped with electric brakes. These complete systems incorporate
the highest quality components in trailer breakaway systems. Meet or exceed D.O.T. specifications regarding trailer
breakaway and holding requirements. If a breakaway occurs between your tow vehicle and your trailer, the breakaway
system will automatically apply consistent braking power to your trailer breaks. Quick and easy to install, the systems comes
with weather resistant, heavy duty polymer case to protect the battery and charger (Sold Separately).
BA-2026 Includes:
Battery Case with A-Frame or post mounting bracket (BA-2018)
Rechargeable Sealed Battery (BA-2023)
Nylon Breakaway Switch (BA-2010)
$ Call for Quote
BA-20005 Includes:
Battery Case with flat surface mounting (BA-2051)
Rechargeable Sealed Battery (BA-2023)
Nylon Breakaway Switch (BA-2010)
$ Call for Quote
* Volume Discounts Available *
For use on single, tandem, tri- and/or four axle trailers equipped with electric brakes. These complete systems incorporate
the highest quality components in trailer breakaway systems. Meet or exceed D.O.T. specifications regarding trailer
breakaway and holding requirements. If a breakaway occurs between your tow vehicle and your trailer, the breakaway
system will automatically apply consistent braking power to your trailer breaks. Quick and easy to install, the systems comes
with weather resistant, heavy duty polymer case to protect the battery and charger (Sold Separately).
BA-2026 Includes:
Battery Case with A-Frame or post mounting bracket (BA-2018)
Rechargeable Sealed Battery (BA-2023)
Nylon Breakaway Switch (BA-2010)
$ Call for Quote
BA-20005 Includes:
Battery Case with flat surface mounting (BA-2051)
Rechargeable Sealed Battery (BA-2023)
Nylon Breakaway Switch (BA-2010)
$ Call for Quote
* Volume Discounts Available *
O.E.M. Style Wiring Harness For models equipped with trailer tow packages.
- Includes OEM connector, Prodigy/Primus connector, and 3 Ft. leads.
- Full vehicle application chart is available upon request.
- Please call for all pricing.
| Brake Control & Cargo Control Special |
Voyager Brake Control (For 1, 2, 3, & 4 Axle Trailers)
BA-9030
Key Features:
$80.26 each
BA-9030
Key Features:
- Recessed controls protect gain and level settings from accidental readjustment.
- Traditional 4-wire hookup and under-dash U-bracket assures secure and permanent installation.
- System is compatible with virtually any 12-volt, negative ground tow vehicle.
- The green LED display tells you that the unit is on and there is a complete circuit with the trailer brakes.
- As braking power is applied, the LED changes color gradually.
$80.26 each
Prodigy P2 Brake Control (For 2, 4, 6 & 8 Axel Trailers)
BA-90885
Key Features: Replaces BA-90185
$149.25 each
BA-90885
Key Features: Replaces BA-90185
- Self-leveling and features new motion sensor technology.
- Works proportionally in reverse. (Great for backing into tough spots)
- Digital display depicts voltage delivery to trailer during braking.
- Exclusive "boost" feature gives users ability to apply more initial braking power when towing heavier trailers.
- Power-saving mode reduces drain on battery when vehicle is not in use.
- Pre-assembled wire harness for simple hookup.
$149.25 each
|
| BA-2018 |
| BA-2010 |
| BA-2023 |
| BA-2051 |
Breakaway Switch
Reinforced case, weldable metal tab, and nylon pull tab.
Rust and corrosion free.
BA-2010 $8.16 each
Replacement Cable & Pin Assembly
BA-2010-A $3.99 each
Reinforced case, weldable metal tab, and nylon pull tab.
Rust and corrosion free.
BA-2010 $8.16 each
Replacement Cable & Pin Assembly
BA-2010-A $3.99 each
Sealed Lead Acid Battery
12-volt sealed lead acid battery for use with breakaway
systems on single, tandem, and tri-axle trailers.
BA-2023 $20.77 each (1-5)
$18.69 each (6+)
12-volt sealed lead acid battery for use with breakaway
systems on single, tandem, and tri-axle trailers.
BA-2023 $20.77 each (1-5)
$18.69 each (6+)
DC to DC (Two-Stage) Battery Charger
Designed to fit securely into breakaway battery cases.
Provides continuous recharge for all 12-volt battery systems
with 4 amp-hr minimum output. Automatic shut-off feature
will not permit overcharge.
BA-2024 $24.30 each
Designed to fit securely into breakaway battery cases.
Provides continuous recharge for all 12-volt battery systems
with 4 amp-hr minimum output. Automatic shut-off feature
will not permit overcharge.
BA-2024 $24.30 each
Battery Case with A-Frame Bracket
Easy one-bolt installation on jackpost or A-Frame.
BA-2018 $9.71 each
Battery Case, Surface Mount
Easy four-bolt installation on any flat surface.
BA-2051 $6.36 each
Easy one-bolt installation on jackpost or A-Frame.
BA-2018 $9.71 each
Battery Case, Surface Mount
Easy four-bolt installation on any flat surface.
BA-2051 $6.36 each
 |  |  |  |  |  |
